 Definitely,
the buzz off new product this year is focused on the One Way coring
tool. Here David Lancaster shows Bonnie Klein how to use it with ease! |
the Lathe that
Soren Berger is coming out with! Looks FAST! Yes it is made from engine
blocks, cranks and rods. Available through Sharptools usa |
 I
found this rather interesting. It is made of investment cast M2 tool
steel. It is hooked up to a vacuum and away you cut. Made by CleanTurn
Tools - www.cleanturn.net |
 Our
own Stephen D Russell, hocking his wares for Arbortech |
 Nichols
lathes, for the discerning woodturner who wants the customization John
Nichols can offer |
 If
you turn nuts, Tagua, Palm,etc, Doren's
Artistic Woodturning's can set you up |
 One
Good Turn's booth. LOTS of Australian woods. |
 Serious
Lathe for serious turners |
 Craig
Lossing, Snakewood |
|
|
|
|
|
Definitely,
the buzz off new product this year is focused on the One Way coring
tool. Here David Lancaster shows Bonnie Klein how to use it with ease!
the Lathe that
Soren Berger is coming out with! Looks FAST! Yes it is made from engine
blocks, cranks and rods. Available through Sharptools usa
I
found this rather interesting. It is made of investment cast M2 tool
steel. It is hooked up to a vacuum and away you cut. Made by CleanTurn
Tools - www.cleanturn.net
Our
own Stephen D Russell, hocking his wares for Arbortech
Nichols
lathes, for the discerning woodturner who wants the customization John
Nichols can offer
If
you turn nuts, Tagua, Palm,etc, Doren's
Artistic Woodturning's can set you up
One
Good Turn's booth. LOTS of Australian woods.
Serious
Lathe for serious turners
Craig
Lossing, Snakewood