The TOWER is stackable, add the number of floors you need. Each floor has 2 rooms holding about 30-40 disks each. Since it is stackable, you can add on as needed.
This can sit on the bench ready to offload into the disk caddy for use at the lathe.

Add the number of floors you need, then add magnets and wall mounts if you need them.
Magnets are used on the back of the top floor (2x) and on the back and the bottom of the “ground” floor.

These are 3d printed in house and made from 100% USA filaments, so made in the USA (hooray!)

The post 2″ disk TOWER first appeared on TurningWood.

Made in house, if you have the magnets and a printer, the files are available HERE

These are the holders only and do not include the wrenches

The post Trent Bosch Hex Wrench Magnetic Holders first appeared on TurningWood.

An email to the recipient will be sent immediately.  You can also enter your email as the recipient and forward the email when you want to send.

The post Gift Card $250 first appeared on TurningWood.

Super strong 6061 aluminum.

16″ long with 5/8″ hole and Green in color

Check out Trent’s video on the tool handles

The post Super Tool Handles – 16″ Green (5/8″) first appeared on TurningWood.

Super strong 6061 aluminum.

16″ long with 1/2″ hole and Blue in color.

Check out Trent’s video on the tool handles

The post Super Tool Handles – 16″ Blue (1/2″) first appeared on TurningWood.

Super strong 6061 aluminum.

12″ long with 3/8″ hole and Red in color

The post Super Tool Handles – 12″ Red (3/8″) first appeared on TurningWood.

How many floors do you need? Well, you can choose a 3 floor and use one side of each floor per grit and you could store 80,120,180,240,320,400 and that would give you storage for at least 50 of each of those grits, or any grits.
A 4 floor would add 600 and 800 frit. Or it you wanted more storage, you could do at least 100 each of 80,120,180,240 (or any 4 grits)

Price included magnets on the top and bottom floors as well as the bottom of the base.

We use rare Earth magnets, two on the back of the top and bottom floor and two on the bottom floor.
We can mix and match some colors on things like the knobs, the base and the top, or go wild and lets do a color scheme personalized to you, subject to material availability.

All of this is made in our shop in Texas, so definitely Made in the USA!

These are custom colors. We can do all solid colors or contrasting top and bottom and mounts

They are also made to order, lead time about a week
When you order pick the color(s) you would like or tell us whatever |
color combo in the comments when you check out
(2 colors for the top, the logo is the second color)

This is an updated version, functionality is the same, change is cosmetic, we removed the knobs at the top and countersunk the fasteners

The post 2″ Disk Tower Colors first appeared on TurningWood.

How many floors do you need? Well, you can choose a 3 floor and use one side of each floor per grit and you could store 80,120,180,240,320,400 and that would give you storage for at least 50 of each of those grits, or any grits.
A 4 floor would add 600 and 800 frit. Or it you wanted more storage, you could do at least 100 each of 80,120,180,240 (or any 4 grits)

Price included magnets on the top and bottom floors as well as the bottom of the base.

We use rare Earth magnets, two on the back of the top and bottom floor and two on the bottom floor.
We can mix and match some colors on things like the knobs, the base and the top, or go wild and lets do a color scheme personalized to you, subject to material availability.

All of this is made in our shop in Texas, so definitely Made in the USA!

If you want to wall mount or table mount , buy that kit separately (mounting hardware not included). The wall mount kit included two back plates with washers that can be screwed into the wall or onto peg board. The magnets hold the Tower onto the wall mounts.
The table top mount works the same.

This is an updated version, functionality is the same, change is cosmetic, we removed the knobs at the top and countersunk the fasteners

The post 2″ Disk Tower Black first appeared on TurningWood.