Shop Aids - TurningWood https://www.turningwood.com Website for learning and sharing knowledge of woodturning. And maybe sell you tools and shit Fri, 18 Sep 2026 01:31:31 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.turningwood.com/wp-content/uploads/2022/07/cropped-tw_logo3-32x32.jpg Shop Aids - TurningWood https://www.turningwood.com 32 32 227099556 Trent Bosch Angle Gauge https://www.turningwood.com/product/254737/ Mon, 03 Aug 2026 18:00:57 +0000 https://www.turningwood.com/?post_type=product&p=254737 This a a handy tool for checking the angle of all your woodturning cutting tools. It has the standard angles for every tool that Trent uses in his shop. Keeping one by your grinder will allow you to check the angle and make sure everything is as expected before or after you are done sharpening. […]

The post Trent Bosch Angle Gauge first appeared on TurningWood.

]]> This a a handy tool for checking the angle of all your woodturning cutting tools. It has the standard angles for every tool that Trent uses in his shop. Keeping one by your grinder will allow you to check the angle and make sure everything is as expected before or after you are done sharpening.

If you are regrinding or have a gouge too hot to touch, dip it in water to cool it down before putting it up to the plastic gague

The post Trent Bosch Angle Gauge first appeared on TurningWood.

]]> 254737 Trent Bosch Hex Wrench Magnetic Holders https://www.turningwood.com/product/trent-bosch-hex-wrench-magnetic-holders/ Sun, 11 Jan 2026 19:36:48 +0000 https://www.turningwood.com/?post_type=product&p=254353 These bad dudes proudly display those awesome, stylish and functional Trent Bosch Tools Hex wrenches. On the 8mm and 10mm wrenches, we use 2x 15mmx3mm N52 magnets, super strong, the 4mm uses just one. These will keep your TBT wrenches close by and easily accessible. Made in house, if you have the magnets and a […]

The post Trent Bosch Hex Wrench Magnetic Holders first appeared on TurningWood.

]]> These bad dudes proudly display those awesome, stylish and functional Trent Bosch Tools Hex wrenches.
On the 8mm and 10mm wrenches, we use 2x 15mmx3mm N52 magnets, super strong, the 4mm uses just one.
These will keep your TBT wrenches close by and easily accessible.

Made in house, if you have the magnets and a printer, the files are available HERE

These are the holders only and do not include the wrenches

The post Trent Bosch Hex Wrench Magnetic Holders first appeared on TurningWood.

]]> 254353 Skew jig (straight) for Wolverine platform https://www.turningwood.com/product/skew-jig-straight-for-wolverine-platform/ https://www.turningwood.com/product/skew-jig-straight-for-wolverine-platform/#respond Fri, 11 Aug 2023 13:26:12 +0000 https://www.turningwood.com/product/skew-jig-straight-for-wolverine-platform/ These are designed by DVP and printed by me. Printed in USA made PETg filament, color varies Designed to be used on the One Way Wolverine platform. If you have a 3d printer, the design is available HERE Designed to be used on the One Way Wolverine platform and gives a straight  edge (not curved)

The post Skew jig (straight) for Wolverine platform first appeared on TurningWood.

]]> These are designed by DVP and printed by me.
Printed in USA made PETg filament, color varies
Designed to be used on the One Way Wolverine platform.

If you have a 3d printer, the design is available HERE
Designed to be used on the One Way Wolverine platform and gives a straight  edge (not curved)

The post Skew jig (straight) for Wolverine platform first appeared on TurningWood.

]]> https://www.turningwood.com/product/skew-jig-straight-for-wolverine-platform/feed/ 0 249692 SRG Grinding Jig for Wolverine Platform https://www.turningwood.com/product/srg-grinding-jig-for-wolverine-platform/ https://www.turningwood.com/product/srg-grinding-jig-for-wolverine-platform/#respond Fri, 11 Aug 2023 13:26:12 +0000 https://www.turningwood.com/product/srg-grinding-jig-for-wolverine-platform/ These are designed by DVP and printed by me.Printed in USA made PETg filament, color variesDesigned to be used on the One Way Wolverine platform. If you have a 3d printer, the design is available here

The post SRG Grinding Jig for Wolverine Platform first appeared on TurningWood.

]]> These are designed by DVP and printed by me.
Printed in USA made PETg filament, color varies

Designed to be used on the One Way Wolverine platform.

If you have a 3d printer, the design is available here

The post SRG Grinding Jig for Wolverine Platform first appeared on TurningWood.

]]> https://www.turningwood.com/product/srg-grinding-jig-for-wolverine-platform/feed/ 0 249693 Varigrind jig 60/40 degrees 8″ wheel https://www.turningwood.com/product/varigrind-jig-60-40-degrees-8-wheel/ https://www.turningwood.com/product/varigrind-jig-60-40-degrees-8-wheel/#respond Fri, 11 Aug 2023 13:26:12 +0000 https://www.turningwood.com/product/varigrind-jig-60-40-degrees-8-wheel/ Varigrind jig for fingernail grind 60/40 8″ wheel. Sets the vari-grind angle, the skickout amount and the distance to the wheel. Color will vary Designed by DVP and if you have a 3d printer, you can get the design HERE

The post Varigrind jig 60/40 degrees 8″ wheel first appeared on TurningWood.

]]> Varigrind jig for fingernail grind 60/40 8″ wheel.
Sets the vari-grind angle, the skickout amount and the distance to the wheel.
Color will vary

Designed by DVP and if you have a 3d printer, you can get the design HERE

The post Varigrind jig 60/40 degrees 8″ wheel first appeared on TurningWood.

]]> https://www.turningwood.com/product/varigrind-jig-60-40-degrees-8-wheel/feed/ 0 249695 Wheel angle set jig 70/20 for 8″ wheel https://www.turningwood.com/product/wheel-angle-set-jig-70-20-for-8-wheel/ https://www.turningwood.com/product/wheel-angle-set-jig-70-20-for-8-wheel/#respond Fri, 11 Aug 2023 13:26:12 +0000 https://www.turningwood.com/product/wheel-angle-set-jig-70-20-for-8-wheel/ This is used to set the Oneway platform to the correct angle (or any steel platform) This is an updated version (12/25) that uses 5/8″x1/8″ N52 magnets, super strong. Additionally, it has been cut down a bit to allow for it’s use on grinders with CBN wheels with guards   If you have a 3d […]

The post Wheel angle set jig 70/20 for 8″ wheel first appeared on TurningWood.

]]> This is used to set the Oneway platform to the correct angle (or any steel platform)

This is an updated version (12/25) that uses 5/8″x1/8″ N52 magnets, super strong.
Additionally, it has been cut down a bit to allow for it’s use on grinders with CBN wheels with guards

 
If you have a 3d Pinter, you can download the previous files here

The post Wheel angle set jig 70/20 for 8″ wheel first appeared on TurningWood.

]]> https://www.turningwood.com/product/wheel-angle-set-jig-70-20-for-8-wheel/feed/ 0 249696 Jig for 8″ wheels 70°/20° angles https://www.turningwood.com/product/jig-for-8-wheels-70a-20a-angles/ https://www.turningwood.com/product/jig-for-8-wheels-70a-20a-angles/#respond Fri, 11 Aug 2023 13:26:12 +0000 https://www.turningwood.com/product/jig-for-8-wheels-70a-20a-angles/ These are designed by DVP and printed by me.Printed in USA made PETg filament, color variesDesigned to be used on the One Way Wolverine platform. This jig is used to set the platform to 70° or 20° when used with an 8″ wheel on a grinder with no guards*. *We do not recommend the use […]

The post Jig for 8″ wheels 70°/20° angles first appeared on TurningWood.

]]> These are designed by DVP and printed by me.
Printed in USA made PETg filament, color varies

Designed to be used on the One Way Wolverine platform.

This jig is used to set the platform to 70° or 20° when used with an 8″ wheel on a grinder with no guards*.

*We do not recommend the use of a grinder without guards on the wheels.

If you have a 3d printer, you can find the design HERE

The post Jig for 8″ wheels 70°/20° angles first appeared on TurningWood.

]]> https://www.turningwood.com/product/jig-for-8-wheels-70a-20a-angles/feed/ 0 249694