I have updated a few items in the Disk Storage/Disk Tower category.
All new towers will have a new top floor and new top. It is redesigned with inset/counter sunk furniture bolts to give it a cleaner aesthetic.
This eliminates the knobs. It is purely for visuals, no change to the form or function or size.
I have also updated the wall mount with slots to help in those situations where you are a wee bit off on the drilling. All wall mounts come with a drilling template.
If you have a previous version, we can do an upgrade kit. It has a new top, a new top floor (with back magnets) new bolts and a wall mount, if you use a wall mount. The reason for the wall mount is early versions of the tower may have gone out with slightly thinner top and bottom pieces. You can measure your and they should be around 8mm thick. If they are, you don’t need the wall mount.
You will have to cut down the 1/4×20 threaded rods, or you could make new ones to add another floor to your tower.
Contact steve@turningwood.com for info on the upgrade kit