Sanding Disks for
Woodturning featuring Mirka products
Check the Frequently Asked Questions for more info
Mirka Gold (P GRIT grading system)
these are the best of the best in premium abrasives.
(80 to 400 Grit) State-of-the-art coated abrasives technology. Super flexible bond means the grit stays on the backing - even after catches. Unsurpassed edge wear. Excellent load resistance. Cuts fast, with an even, consistent finish. Flexibility like no other; yet tough, with super edge wear. Full resin bonding for strength and durability and a special non-loading stearate coating
(600-1200
grit) Micron-graded abrasives listed with traditional (600-1500 Grit)
equivalents, the industry's finest micro-finishing abrasive - designed
to be used dry. Unmatched load resistance provides
even, consistent scratch pattern. Combines full resin bonding for
strength and durability and a special non-loading stearate.
They are durable, yet supple enough
not to gouge.
These disks are available
in 1", 2" and 3" sizes
Buy Mirka Gold NOW
Abralon - (P GRIT grading system) foam backed disks!
Great for high luster on exotics, man made materials and anywhere a super fine finish is required. (Sand your lacquer before buffing!)
Combines benefits of abrasive cloth and non-woven products. Constructed with a fabric face, foam center, and a grip backing. Abrasive grains are bonded evenly to the fabric face. Openings in the fabric allow water, solvent and air to flow freely around the abrasive. Works especially well when sanding contoured surfaces, corners and sharp edges. Open cell design holds large amounts of water or solvent for lubrication and cooling. Foam center also provides for even surface pressure that helps eliminate finger marks when hand sanding.
These disks are
available in 2" and 3" sizes 360,
500, 1000, 2000, 4000 Grits
Buy Mirka Abralon Now
Abranet Sanding Screen
Available in 80-1000 Grit
An aluminum
oxide bonded to a polyamide fabric mesh. It is a grip disk that
consists of a flat, reticular disc with thousands of holes. For the
woodturner this means superior anti-clogging properties on bare wood,
and awesome for dry sanding out a film finish; waterborne or solvent
based! Abranet has a much longer lifetime and retains its original
sanding performance much longer than traditional abrasives. This means
that sanding can be carried out more quickly and more effectively.
Extended product life requires less use of materials. This stuff rocks
the planet! You can blow out the build up with air and hit the crepe
pad to clean. You will wear the grit off before you can clog the stuff
too much to use. I recommend and interface pad so you don’t wear out
the hook and loop.
These disks are available in 2” and 3” packages of 10, and are stamped
with the grit number on the back.
Buy
Mirka Abranet Now
All 2" and 3" disks
are individually marked with the grit # on the back. No more guessing
when you drop them
Not only that, but they all have a high temp Velcro backing - NO
SEPARATION!
Special sizes available
*If you don't
agree
they are the best, return your unused portion and I will give you your
money back!
If for any reason you are dissatisfied with the products you have purchased from us, simply send back the unused portion and receive a refund for that portion. Please include a note, telling us why you are unhappy so that we may better serve you in the future - Thank You - Steve Worcester
You can also phone in your order and pay by
VISA, MasterCard or Discover.
Just call with your order, or leave a message and we can take your VISA, MasterCard or Discover # over the phone