Orders in USA under $50 will be shipped 1st class mail and charged $5.00 for shipping. Orders in USA over $50 will be shipped Priority Mail and charged $9 for shipping. International Orders up to $99.99 (US) are $45, above $100 (US) are $75 or actual shipping, whichever is less. If you can fit it all in a small USPS flat rate box, it will only get charged the actual shipping.

Should you have any questions or comments, feel free to email me or phone (972) 424-7958. Thank you for your continued business.

-Steve Worcester Woodturning

Home»
Sanding Mandrels, Blocks, Interface Pads

Sanding Mandrels, Blocks, Interface Pads

1" Skilton Mandrel

Code: TS-1

$18.00

Qty in Basket: none

2" Skilton Mandrel

Code: TS-2

$21.00

Qty in Basket: none

3" Skilton Mandrel

Code: TS-3

$25.00

Qty in Basket: none

Hand Sander 2"

Code: HS2

$10.00

Qty in Basket: none

3" add on pad for hand sanders or mandrels

Code: 3HA

$10.00

Qty in Basket: none

Skilton 2" Mandrel for passive sander only

Code: TS2-P

$22.00

Qty in Basket: none

Skilton 3" Mandrel for Passive Sander Only

Code: TS3-P

$26.00

Qty in Basket: none

Disk Holder Protective Pad 2"

Code: DHPP2

$2.50

2 available for immediate delivery

Qty in Basket: none

Disk Holder Protective Pad 3"

Code: DHPP3

$3.00

Please Note: 'Disk Holder Protective Pad 3"' is currently backordered. Please be aware that there may be a delay in shipping.

Qty in Basket: none

Disk Holder Protective pad 5" no holes

Code: DHPP5

$6.00

3 available for immediate delivery

Qty in Basket: none

2" Interface pad 1/4" medium density

Code: IP-2M

$4.00

17 available for immediate delivery

Qty in Basket: none

3" Interface pad 1/4" medium density

Code: IP-3M

$6.00

15 available for immediate delivery

Qty in Basket: none

2" Interface pad 1/2" soft density

Code: IP-212S

$4.00

Out of stock

Qty in Basket: none

3" Interface pad 1/2" soft density

Code: IP-312S

$6.00

48 available for immediate delivery

Qty in Basket: none

2" Interface pad 3/4" soft density

Code: IP-2S

$4.00

24 available for immediate delivery

Qty in Basket: none

3" Interface pad 1" soft density

Code: IP-3S

$6.00

41 available for immediate delivery

Qty in Basket: none

Preppin Weapon

Code: PREP

$27.00

Qty in Basket: none

Preppin Weapon replacement rubber

Code: Prep-rp

$10.00

Qty in Basket: none

Super Assilex Yellow Foam Block

Code: SAFB

$13.50

Qty in Basket: none

Super Assilex Pads - Medium - single

Code: SAP-M

$7.00

Qty in Basket: none

Super Assilex Yellow Foam Block -seconds

Code: SAFB-S

$10.00

Qty in Basket: none

We now only carry one types of hook and loop mandrels (the things that go in the drill); It is the Tim Skilton mandrel. 1/4" hex shaft (exclusive) with two different density of foam glued and screwed together
The economy mandrel we used to sell were a round shaft on yellow foam with a micro hook backing (not good for Abranet without a Disk Holder Protective Pad). We had so many problems with them and issues with Chinese manufacturing, we gave up

Use interface pads to vary the density of the mandrel. Medium is firm and used when you want aggressive sanding. Soft are used when you want less aggressive sanding and are good for warped pieces.
Use a Disk Holder Protective Pad (orange pad) as a sacrificial pad between the mandrel and the disk. Saves the hook and loop on the mandrel from the heat that melts the fingers.